When you want to update your classic car with modern technology and safety features, disc brakes are essential. These brakes are more reliable and perform better than drums. They also give you options for modern technology like anti-lock brakes and assisted braking.

If you are planning on updating an older car with disc brakes, there are a lot of things to consider. You may need to replace drums and update older systems. The following disc brake guide will walk you through the installation of new brakes:

Removing Existing Brakes and Drums

If your car has rear drum brakes, they need to be removed before installing the discs. The entire wheel hub where drums are installed will need to be removed. The old hubs may need to be removed if you are planning on doing upgrades and adding technology to your brake systems.

Inspecting and Replacing Old Brake Lines

The old brake lines of your car could be a serious hazard. This is because old brake lines are often made of metal materials that can corrode and fail. Therefore, you need to inspect all your brake lines to make sure the lines and any connections are in good condition. Invest in new lines and replace them if you are doing major upgrades to your car's brake system.

Checking the Existing Brake Equipment

The existing brakes on your car may also need other repairs or upgrades. First, check the calipers of existing discs on the front wheels. You will also want to inspect the master cylinder. If you are doing changes and adding technology, replace these parts.

Upgrades to the Brake Systems to Install Discs

The existing brake system could also need some improvements before the new discs are installed. The installation of the new brakes may require new equipment. If you are going to install a brake-assist system or other technology, the brakes will need a controller. Therefore, you will probably need to have the system wired and the additional parts installed with the new discs.

Installing the Discs and Modern Technology

The last thing that needs to be done is installing the discs. The discs can be standard modern brake equipment or high-performance brake parts. The modern discs can include additional technology, such as controllers for brake-assist systems and anti-lock brake parts.

Make the right changes if you are going to do some of these upgrades to your brake system. Contact a disc brake service when you get ready to install new brakes on your classic car.